Customize grinded solid tungsten carbide rod for high pressure pump plunger--ZhenFang Carbide

Customize grinded solid tungsten carbide rod for high pressure pump plunger

Advantages of our tungsten carbide rods:

1. Extruded rod and HIP sintering. 2. Ultrafine particle size powder. 3. Runout and roundness can be less than 5 microns (0.005mm). 4. Carbide rods are solid or with straight / spiral coolant holes.

Grade :	various grade of extruded tungsten carbide rods /bars( Other grade such as YG8 YG10 , YL10.2, YG12)
Quality	High precision and 100% quality assurance.
Engineering	Professional engineer for more than 30 years.
Application	Welding carbon steel materials
Standard	Dayton, Lane, DIN, ISO, MISUMI, EDM, FIBRO, MOELLER, HASCO, etc.
length:	Diameter from 0.3mm to Dia 52.00mm， Length: from 2.0mm to 1000 mm.
Place of origin	China.Jiangsu.Kunshan.
Surface treatment	Polished to h6 Tolerance or Blanks( ungrounded), both OK.
Grain size	0.2u 0.4u 0.6u 0.8u according to the grade and composite.
extrusion	solid carbide rods or pressing rods for large diameter.
Physical properties:	Density: 14.45g/cm3, TRS> 3800 MPA, Hardness> 92.00HRA.
Chemical composition:	10%Cobalt,12%Cobalt and other as you need.
After sales service	Technical support and best after-sales service.
Delivery time	3-5 working days, depending on the quantity ordered. Express delivery via DHL, UPS, FEDEX, TNT or shipping.
advantage	1.Extrusion rods and HIP sintering.2.Ultrafine grain size powders3.Run-out and Roundness can be less than 5 micron(0.005mm).4.Carbide rods is solid or with straight/helix coolant holes.

Carbide Rods are used for cutting aluminum alloy, cast iron, stainless steel, refractory alloy steel, nickel based alloy, titanium alloy and nonferrous metals. With several years’ development, with our good quality and competitive price, our products have been widely recognized by worldwide makers of tools. We are looking forward to establish new business with new customers.

The below grades are listed for your reference:

Grade	Density g/cm3	Hardness HRA (hv)	T.R.S (MPa)	Performances &applications recommended
YG6	14.9	89.5	2150	Good Wear resistance, used for hard wood,processing original wood, aluminum section bar,brass rod and cast iron.
YG8	14.6	89	2320	Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG11	14.4	87.5	2260	Medium grain, for wear parts and mining tools
YG15	14.1	86.5	2400	Medium grain, for mining tools, cold heading and punching dies
YS2T	14.45	92.5	2800	Fine carbide,high wear resistance,high bending strength,high resistance to bonding, high thermal strength.Machining of refractory alloys, stainless steel and high manganese steel etc.Mainly used for disc cutter and other tools
YL10.2	14.5	92.5	3400	Wear resistance and strength comparatively higher,suitable for processing cast iron, non-ferrous metal and non-metalloid materials
YNi8	14.6	88.5	1710	This grade with 8% nickel binder, it has good wear resistance& corrosion resistance performance ,especially used for high pressure environmental , also good for cutting the titanium alloy.

Other grades can be supplied by your request.

Usage:

carbide rods used for making the drill bits/ end-mills / reamers .automobile special cutters, printed circuit board special cutters, engine special cutters, Horologe processing special cutters, integral vertical milling cutter, graver and etc. Besides, they can be used for making of cemented carbide stamping head, Core bar and perforation tools.

Your drawings are pretty welcomed.

Application Are
As tungsten carbide have good material properties, it is widely used in varous industries:Paper, packaging, printing, non-ferrous metal processing industry,Mechanical, chemical, petroleum, metallurgy, electronic and natioanl defense industries.

Advantge of Our tungsten carbide plunger
1. We are factory ,guarantee competitive price and high quality.
2. High density,Good machinability ,High modulus of elasticity ,Strong corrosion resistance,Good mechanical properties
3. It can effectively absorb X rays and gamma rays (the absorption of X rays andγ rays is higher than lead 30~40%)
4. 100% QC inspection Before Shipment.
5. We guarantee that all of our products are used with 100% Virgin Raw Material.
6. Customization is avaliable

Our more Products
1. Tungsten Carbide rod
2. Tungsten Carbide Sealed Ring
3. Tugnsten Carbide Wear parts
4. Tugnsten Carbide Dies
5. Tungsten Carbide Non-standard parts
6. Tungsten Carbide Circular Blade

Our factory

Zhuzhou Zhenfang Yaguang Tungsten-Molybdenum Co.,LTD is a professional manufacture in tungsten carbide field. We have engaged in this field for over ten years. We have rich experience on tungsten carbide studying and manufacture.We pursuit providing efficient solution and high quality products for clients. We specialize in tungsten carbide rod, carbide plate&strips, carbide dies, carbide roller, carbide wear parts for petrochemical industry, carbide cutting tools.Tungsten carbide rod and customized wear parts is our advantage.
We always keep good relationship with our clients, enhancing communication

FAQ

Q1.What is your advantage ?

A:We have the best factory to produce for you,could guarantee the price is the most competitive. BEGUN carbide was recognized by market, it widely used for Chinese big project,such as subway,high speed rail,tunnel,mining and so on.At the same time,many big projects of the South africa,America,European and Austria also choose our carbide.

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% balance before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3.Could you offer OEM and ODM service?

A:That is ok ,we have more than 5 years experience in OEM service.professional R&D department is ready to design products to fit your specifications,they can offer the professional advice and CAD drawings(3D) for you!

Q4. How about your delivery time?

A: Lead time as fast as 7-15 days!

Q5. What is the MOQ ?

A.No MOQ for our existing stock,for special size,MOQ is 5 KGS.

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery.Our production is based on ISO9001,we have more than 10 years experience of QC team and strictly quality control system in our production process.

Q8. What about the package?

A.It can make as the you need and depend on the products shapes. Generally, we can provide iron drum, carton, wooden case, and bag packages.

Q9: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Our Services

Customer Notice
To save your value time, please inform us of the following information:
1. Grade
2. Type/Dimension/Clear Drawing
3. Available tolerance
4. Order quantity
5. Blanks or finished products
6.If you have any special requirements of the products, pls send us in advance. We will satisfy you as much as we can.

Pls feel free to contact us you have any requirments, any inquiry is welcomed!
Contact person:Ms Sharon Chen

Whatapp/Wechat:+86 13823202651

Email address:sharon@chinahardalloy.com

Website:www.w0731zzzf.com